Journal: Quality and Reliability Engineering International

Found 699 papers in total
Extending the Possibilities of Quantitative Determination of SIL ‐ a Procedure Based on IEC 61508 and the Markov Model with Common Cause Failures
Extending the Possibilities of Quantitative Determination of SIL ‐ a Procedure Based on IEC 61508 and the Markov Model with Common Cause Failures
2017,
Generalized equations for calculating the probability of failure on demand (PFD) in...
Distributional Properties of Multivariate Process Capability Indices under Normal and Non-normal Distributions
Distributional Properties of Multivariate Process Capability Indices under Normal and Non-normal Distributions
2017,
Multivariate capability analysis has been the focus of study in recent years, during...
Reduction of the Effect of Estimation Error on In-control Performance for Risk-adjusted Bernoulli CUSUM Chart with Dynamic Probability Control Limits
Reduction of the Effect of Estimation Error on In-control Performance for Risk-adjusted Bernoulli CUSUM Chart with Dynamic Probability Control Limits
2017,
The in‐control performance of any control chart is highly associated with the...
Simultaneous Use of Runs Rules and Auxiliary Information With Exponentially Weighted Moving Average Control Charts
Simultaneous Use of Runs Rules and Auxiliary Information With Exponentially Weighted Moving Average Control Charts
2017,
Quality has become a key determinant of success in all aspects of industry....
Distribution-free Lepage Type Circular-grid Charts for Joint Monitoring of Location and Scale Parameters of a Process
Distribution-free Lepage Type Circular-grid Charts for Joint Monitoring of Location and Scale Parameters of a Process
2017,
In the last 5 years, research works on distribution‐free (nonparametric)...
MaxEWMA Control Chart for a Weibull Process with Individual Measurements
MaxEWMA Control Chart for a Weibull Process with Individual Measurements
2017,
To monitor a Weibull process with individual measurements, some methods such as power...
Control Charts for Monitoring Correlated Poisson Counts with an Excessive Number of Zeros
Control Charts for Monitoring Correlated Poisson Counts with an Excessive Number of Zeros
2017,
The zero‐inflated Poisson distribution serves as an appropriate model when...
The c-Chart with Bootstrap Adjusted Control Limits to Improve Conditional Performance
The c-Chart with Bootstrap Adjusted Control Limits to Improve Conditional Performance
2016,
The integrity of Phase II control charting depends on the accuracy of Phase I...
A Mixed EWMA‐CUSUM Control Chart for Weibull-Distributed Quality Characteristics
A Mixed EWMA‐CUSUM Control Chart for Weibull-Distributed Quality Characteristics
2016,
The control charts have been widely used for process monitoring. Shewhart control...
Bayesian D-optimal Designs for Weibull Distribution with Censoring
Bayesian D-optimal Designs for Weibull Distribution with Censoring
2016,
Bayesian optimal designs have received increasing attention in recent years,...
Reliability Estimation for Products Subjected to Two-Stage Degradation Tests Based on a Gamma Convolution
Reliability Estimation for Products Subjected to Two-Stage Degradation Tests Based on a Gamma Convolution
2016,
Degradation models have received much attention in the area of reliability estimation,...
A New EWMA Control Chart for Monitoring Poisson Observations
A New EWMA Control Chart for Monitoring Poisson Observations
2016,
Quality control charts based on exponentially weighted moving average (EWMA) has been...
A Generally Weighted Moving Average Signed-rank Control Chart
A Generally Weighted Moving Average Signed-rank Control Chart
2016,
The idea of process monitoring emerged so as to preserve and improve the quality of a...
Reliability Analysis for Laptop Computer Under Electrical Harmonics
Reliability Analysis for Laptop Computer Under Electrical Harmonics
2016,
Because of electrical variations presented in the power line, the estimated...
A Semi-parametric Model for Microstructure Analysis of Advanced High-strength Dual-phase Steels Considering Sample Variation
A Semi-parametric Model for Microstructure Analysis of Advanced High-strength Dual-phase Steels Considering Sample Variation
2016,
Microstructure analysis of advanced high‐strength dual‐phase steels has...
A Multi-objective Joint Burn-in and Imperfect Condition-based Maintenance Model for Degradation-based Heterogeneous Populations
A Multi-objective Joint Burn-in and Imperfect Condition-based Maintenance Model for Degradation-based Heterogeneous Populations
2016,
For some engineering design and manufacturing applications, particularly for evolving...
A Hybrid Model Based on Singular Spectrum Analysis and Support Vector Machines Regression for Failure Time Series Prediction
A Hybrid Model Based on Singular Spectrum Analysis and Support Vector Machines Regression for Failure Time Series Prediction
2016,
Effectively forecasting the failure data in the maintenance stage is essential in many...
A Nonlinear Integer Programming Approach to Solving the Robust Parameter Design Optimization Problem
A Nonlinear Integer Programming Approach to Solving the Robust Parameter Design Optimization Problem
2016,
Robust parameter design is a widely implemented design methodology for continuous...
Reliability Analysis of Multistage Interconnection Networks
Reliability Analysis of Multistage Interconnection Networks
2016,
Multistage interconnection networks (MINs) are widely used for reliable data...
Iterative Designed Experiment Analysis (IDEA)
Iterative Designed Experiment Analysis (IDEA)
2016,
In the traditional use of design of experiments (DOE), the analysis of a designed...
Projection Properties of Blocked Non-regular Two-level Designs
Projection Properties of Blocked Non-regular Two-level Designs
2016,
Minimum resolution IV (MinResIV) and Plackett and Burman (PB) designs are popular...
Process Capability Analysis via Continuous Ranked Probability Score
Process Capability Analysis via Continuous Ranked Probability Score
2016,
Process capability analysis is an important aspect of quality control. Various process...
An Integrated Framework for Developing Discrete-Time Modelling in Software Reliability Engineering
An Integrated Framework for Developing Discrete-Time Modelling in Software Reliability Engineering
2016,
In the software reliability engineering literature, few attempts have been made to...
Double EWMA-Based Polynomial Quality Profiles Monitoring
Double EWMA-Based Polynomial Quality Profiles Monitoring
2016,
Profile monitoring is useful whenever the quality is described by a relationship...
Papers per page: